某电厂机组FGD项目旁路档板招标文件中英文版(doc 24页)

资料简介：

日   录
Appendix1Technical specification......................3
1 General 总则......................3
2 General Description of Project工程概况......................4
3 design and operation conditions......................6
4 Technical Conditions技术条件......................9
5 Design and Supply Scope and Interface Specification设计与供货范围及接口规范......................16
6 Cleaning, Paint, Package, Load/Unload, Transportation and Storage......................21
Appendix 2 technical data and delivery schedule 技术数据与交货进度......................23

 

 

 

1.1 本技术规范适用于河北王滩电厂4台600WM机组的烟气脱硫工程。本规范书包括旁路挡板门本体、辅助设备系统的功能设计、结构、性能、安装和试验等方面的技术要求。
This specification is applicable for Hebei Wangtan Power Plant 4X 600MW FGD project. This Specifications covers the technical requirements for the functional design, construction, performance, installation and commissioning of the bypass dampers with accessories system.
 
1.2 本技术规范所提出的是最低限度的技术要求，并未对一切技术细节做出规定，也未充分引述有关标准和规范的条文。供方保证提供符合本技术规范要求和现行中国或国际通用标准的优质产品。
The contents of the specification are the minimum requirements, neither providing any technical details, nor referring to provisions of the relevant standards/specifications. The Supplier shall develop and supply qualified products based on the specification and present international codes and standards.

1.3 供方保证提供的设备应完全符合本技术规范的要求。
The Supplier shall guarantee that the supplied equipment is in full compliance with this the requirements herein.

1.4 供方提供的设备应是全新的和先进的，并经过2年以上运行实践已证明是完全成熟可靠的产品。同时必须满足国家的有关安全、环保等强制性法规、标准的要求。
All equipments and components shall be advanced, new, complete in technology and process with experience at least two (2) years and reliable products. In addition, the delivery shall be conducted in accordance with the compelling requirements of applicable safety and environment laws and standards.

1.5 凡在供方设计范围之内的外购件或外购设备，供方应至少要推荐2至3家产品供需方确认，且需方具有选择的权利，而且需方有权单独采购，但技术上均由供方负责归口协调。
For any equipment and parts to be imported, within the Supplier’s scope of design work, the Supplier shall recommend at least 2 –3 manufacturers for the confirmation of the Buyer. And the Buyer shall have right to choose the manufacturer and to solely purchase materials. However, the Supplier shall offer interface and coordination technically.

1.6 在签订合同之后，到供方开始制造之日的这段时间内，需方有权提出因规范、标准和规程发生变化而产生的一些补充修改要求，供方应遵守这个要求，具体内容由供需双方共同商定。
During the time period from the conclusion of contract to the commencement of the Supplier’s fabrication, the Buyer is entitled to request modification due to the change of specifications, standards and/or codes. The Supplier shall comply with the request.

..............................

上一篇：某某省招标投标条例(doc 18页)

下一篇：某某项目投标报告(doc 20页)

某县中医院彩超采购项目招标文件(DOC 57页)

某工程公开招标正式投标人确定方式的规定(doc 8页)

煤矿主排水远程自动化控制系统采购招标文件(DOCX 59页)

招标投标法实施条例解读(PPT 72页)

工程招标书经典模板(doc 45页)

煤矿招标项目工程施工安全管理方案(DOC 34页)